rivets › blind rivets
MS20605B3W3
Military Standard Blind Rivet
Description
Fastener Length: 1/4"
Specifications
| Countersink Angle | 99.0 degrees minimum and 101.0 degrees maximum |
|---|---|
| Expansion Device | Serrated stem-type w |
| Fastener Length | 0.265 inches maximum |
| Grip Length | 0.126 inches minimum and 0.187 inches maximum |
| Head Major Diameter | 0.179 |
| Head Style | Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) |
| Material | Aluminum |
| Material Specification | Mil-w-7986 mil spec single material response sleeve, Mil-w-7986 mil spec single material response stem |
| Shank Diameter | 0.093 inches minimum and 0.097 inches maximum |
| Shank Style | Pull through hollow shank |
| Shear Strength | 70 single pounds per square inch |
| Surface Treatment | Anodize, Chromate |
| Surface Treatment Specification | Mil-a-8625 mil spec single treatment response sleeve, Mil-c-5541 mil spec single treatment response stem |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
- MS20605B3W2
- MS20605B3W3
- MS20605B3W4
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- MS20605M3W3 MS 17/64 in · Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) · Nickel
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error