rivets › blind rivets
MS20605AD4W4
Military Standard Blind Rivet
Description
Fastener Length: 11/32
Specifications
| Countersink Angle | 99.0 degrees minimum and 101.0 degrees maximum |
|---|---|
| Expansion Device | Serrated stem-type w |
| Fastener Length | 0.357 inches maximum |
| Grip Length | 0.188 inches minimum and 0.250 inches maximum |
| Head Major Diameter | 0.225 |
| Head Style | Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) |
| Material | Aluminum |
| Material Specification | Astm a545 assn std all material responses stem, Mil-w-7986 mil spec single material response sleeve |
| Shank Diameter | 0.124 inches minimum and 0.128 inches maximum |
| Shank Style | Pull through hollow shank |
| Shear Strength | 125 single pounds per square inch |
| Surface Treatment | Anodize or chromate |
| Surface Treatment Specification | Mil-a-8625 ty 1 cl 1 mil spec 1st treatment response sleeve or mil-c-5541 cl 1a mil spec 2nd treatment response sleeve |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
- MS20605AD4W2
- MS20605AD4W3
- MS20605AD4W4
- MS20605AD4W5
- MS20605AD4W6
- MS20605AD4W8
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- MS20605B4W4 MS 23/64 in · Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) · Aluminum
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error