rivets › solid rivets
MS20426E5-9
Military Standard Solid Rivet
Description
Solid Rivet (Lb) - MS20426E5-9 (1 Pound)
Specifications
| Countersink Angle | 99.5 degrees minimum and 100.5 degrees maximum |
|---|---|
| Fastener Length | 0.552 inches minimum and 0.572 inches maximum |
| Head Major Diameter | 0.290 inches maximum |
| Head Style | Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) |
| Heat Treatment | T-73 solution heat treated |
| Material | Aluminum |
| Material Specification | Qq-a-430 fed spec single material response |
| NIIN | 01-293-3411 |
| NSN | 5320-01-293-3411 |
| Rivet Type | Solid |
| Shank Diameter | 0.155 inches minimum and 0.159 inches maximum |
| Shank Style | Straight w/radius chamfered tip |
| Shear Strength | 41000 single pounds per square inch |
| Special Features | Aluminum alloy 7050 |
| Surface Treatment | Anodize or chromate |
| Surface Treatment Specification | Mil-a-8625 mil spec 1st treatment response or mil-c-5541 mil spec 2nd treatment response |
| Weight | 1 lb |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- MS20426T5-9 MS 9/16 in · Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) · Titanium
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error