rivets › solid rivets
MS20426E3-8
Military Standard Solid Rivet
Description
Solid Rivet
Specifications
| Countersink Angle | 99.5 degrees minimum and 100.5 degrees maximum |
|---|---|
| Fastener Length | 0.490 inches minimum and 0.510 inches maximum |
| Head Major Diameter | 0.183 inches maximum |
| Head Style | Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) |
| Heat Treatment | T-73 solution heat treated |
| Material | Aluminum |
| Material Specification | Qq-a-430 fed spec single material response |
| Shank Diameter | 0.093 inches minimum and 0.097 inches maximum |
| Shank Style | Straight w/radius chamfered tip |
| Shear Strength | 41000 single pounds per square inch |
| Special Features | Aluminum alloy 7050 |
| Surface Treatment | Chromate |
| Surface Treatment Specification | Mil-c-5541,class 1a mil spec single treatment response |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
- MS20426E3-3A
- MS20426E3-7A
- MS20426E3-7S
- MS20426E3-8
- MS20426E3-10A
- MS20426E3-12A
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- NAS1199-3-8 NAS 1/2 in · Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) · Iron
- MS20427M3C8 MS 1/2 in · Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) · Nickel
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error