rivets › solid rivets
MS20426D8-14
Military Standard Solid Rivet
Description
Fastener Length: 7/8"
Specifications
| Countersink Angle | 99.5 degrees minimum and 100.5 degrees maximum |
|---|---|
| Fastener Length | 0.865 inches minimum and 0.885 inches maximum |
| Grip Length | 0.490 nominal mils and 0.510 nominal centimeters |
| Head Major Diameter | 0.472 inches minimum and 0.480 inches maximum |
| Head Style | Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) |
| Material | Aluminum |
| Material Specification | Qq-a-430 fed spec single material response |
| Shank Diameter | 0.249 inches minimum and 0.253 inches maximum |
| Shank Style | Straight w/radius chamfered tip |
| Shear Strength | 33000 single pounds per square inch |
| Surface Treatment | Anodize or oxide film |
| Surface Treatment Specification | Mil-a-8625 mil spec 1st treatment response or mil-c-5541 mil spec 2nd treatment response |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
No interchangeable or dimensionally similar parts are on record for MS20426D8-14. Try the cross-reference lookup to search by a different part number.
Catalog data updated 2026-07-05. Report a data error