rivets › solid rivets
MS20426B5-32
Military Standard Solid Rivet
Description
Fastener Length: 1-63/64", roughly 250 pieces per pound
Specifications
| Countersink Angle | 99.5 degrees minimum and 100.5 degrees maximum |
|---|---|
| Fastener Length | 1.990 inches minimum and 2.010 inches maximum |
| Grip Length | 1.756 nominal mils and 1.776 nominal centimeters |
| Head Major Diameter | 0.282 inches minimum and 0.290 inches maximum |
| Head Style | Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) |
| Material | Aluminum |
| Material Specification | Qq-a-430 fed spec single material response |
| Shank Diameter | 0.155 inches minimum and 0.159 inches maximum |
| Shank Style | Straight w/radius chamfered tip |
| Shear Strength | 24000 single pounds per square inch |
| Surface Treatment | Anodize or oxide film |
| Surface Treatment Specification | Mil-a-8625 mil spec 1st treatment response or mil-c-5541 mil spec 2nd treatment response |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- MS20426AD5-32 MS 2 in · Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) · Aluminum
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error