rivets › solid rivets
MS20426B3-6
Military Standard Solid Rivet
Description
Solid Rivet - MS20426B3-6 (1 Pound)
Specifications
| Countersink Angle | Between 99.5 degrees and 100.5 degrees |
|---|---|
| Fastener Length | Between 0.365 inches and 0.385 inches |
| Grip Length | 0.224 mils and 0.244 centimeters |
| Head Major Diameter | Between 0.175 inches and 0.183 inches |
| Head Style | Flush (flat) countersunk (included angle - less than 135 degrees w or w/o chamfer) |
| Material | Aluminum |
| Material Specification | Qq-a-430 federal specification single material response |
| Rivet Type | Solid |
| Shank Diameter | Between 0.093 inches and 0.097 inches |
| Shank Style | Straight w/radius chamfered tip |
| Shear Strength | 24000 single pounds per square inch |
| Surface Treatment | Anodize or oxide film |
| Surface Treatment Specification | Mil-a-8625 military specification 1st treatment response or mil-c-5541 military specification 2nd treatment response |
| Weight | 1 lb |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- MS20426A3-6 MS 25/64 in · Aluminum
- MS20426D3-6 MS 25/64 in · Aluminum
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error