rivets › solid rivets
MS20426AD3-7
Military Standard Solid Rivet
Description
Solid Rivet (Lb) - MS20426AD3-7 (1 Pound)
Specifications
| Alternate Part Number | AN426AD3-7 |
|---|---|
| Countersink Angle | Between 99.5 degrees and 100.5 degrees |
| Fastener Length | Between 0.428 inches and 0.448 inches |
| Grip Length | 0.297 |
| Head Major Diameter | Between 0.175 inches and 0.183 inches |
| Head Style | Flush (flat) countersunk (included angle - less than 135 degrees w or w/o chamfer) |
| Material | Aluminum |
| Material Specification | Qq-a-430 federal specification single material response |
| NIIN | 00-117-6941 |
| NSN | 5320-00-117-6941 |
| Rivet Type | Solid |
| Shank Diameter | Between 0.093 inches and 0.097 inches |
| Shank Style | Straight w/radius chamfered tip |
| Shear Strength | 26000 single pounds per square inch |
| Surface Treatment | Anodize or oxide film |
| Surface Treatment Specification | Mil-a-8625 military specification 1st treatment response or mil-c-5541 military specification 2nd treatment response |
| Weight | 1 lb |
Cross-reference
Interchangeable
Parts that share a National Stock Number or are listed as an alternate for MS20426AD3-7 — functionally equivalent.
- MS20426AD3-7.5 Same NSN 31/64 in · Aluminum
- AN426AD-3-7 Listed alternate
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- MS20427M3-7 MS 29/64 in · Nickel
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error