rivets › solid rivets
MS20426AD2-2
Military Standard Solid Rivet
Description
Length: 1/8", flush flat head, roughly 23,000 pieces per pound, MS20426 series rivet
Specifications
| Countersink Angle | Between 99.5 degrees and 100.5 degrees |
|---|---|
| End Application | Sh-60f; low altitute navigation & targeting infrared system (lantirn); communications systems an/wrr-7 carrier based asw an/pps-5b; helicopter c-2a (reprocured); radar set hc-130); aircraft ec-130e mc-130h (ac-130h harpoon (agm-84); aircraft all-weather anti-ship ah-1w; missile advance attack mh-53e; helicopter w/s: helicopter |
| Fastener Length | Between 0.115 inches and 0.135 inches |
| Grip Length | Between 0.021 inches and 0.041 inches |
| Head Major Diameter | Between 0.110 inches and 0.118 inches |
| Head Style | Flush (flat) countersunk (included angle - less than 135 degrees w or w/o chamfer) |
| Material | Aluminum |
| Material Specification | Qq-a-430 federal specification single material response |
| Shank Diameter | Between 0.061 inches and 0.065 inches |
| Shank Style | Straight |
| Shear Strength | 26000 single pounds per square inch |
| Surface Treatment | Anodize or oxide film |
| Surface Treatment Specification | Mil-a-8625 military specification 1st treatment response or mil-c-5541 military specification 2nd treatment response |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
No interchangeable or dimensionally similar parts are on record for MS20426AD2-2. Try the cross-reference lookup to search by a different part number.
Catalog data updated 2026-07-05. Report a data error