rivets › solid rivets
MS20426A8-8
Military Standard Solid Rivet
Description
Fastener Length: 1/2"
Specifications
| Countersink Angle | 99.5 degrees minimum and 100.5 degrees maximum |
|---|---|
| Fastener Length | 0.490 inches minimum and 0.510 inches maximum |
| Grip Length | 0.115 nominal mils and 0.135 nominal centimeters |
| Head Major Diameter | 0.472 inches minimum and 0.480 inches maximum |
| Head Style | Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) |
| Head Type | Flush Inch |
| Industry Standards/Certification | MS20426 |
| Material | Aluminum |
| Material Specification | Qq-a-430 fed spec single material response |
| Rivet Type | Solid |
| Shank Diameter | 0.249 inches minimum and 0.253 inches maximum |
| Shank Style | Straight w/radius chamfered tip |
| Weight | 1 lb |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- MS20426AD8-8 MS 1/2 in · Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) · Aluminum
- MS20426B8-8 MS 1/2 in · Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) · Aluminum
- MS20426D8-8 MS 1/2 in · Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) · Aluminum
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error