rivets › solid rivets
MS20426A4-13
Military Standard Solid Rivet
Description
Fastener Length: 3/4, roughly 1100 pieces per pound
Specifications
| Countersink Angle | 99.5 degrees minimum and 101.5 degrees maximum |
|---|---|
| Fastener Length | 0.802 inches minimum and 0.822 inches maximum |
| Head Major Diameter | 0.221 inches minimum and 0.229 inches maximum |
| Head Style | Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) |
| Heat Treatment | As fabricated |
| Material | Aluminum |
| Shank Diameter | 0.124 inches minimum and 0.128 inches maximum |
| Shank Style | Straight w/radius chamfered tip |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- MS20426D4-13 MS 13/16 in · Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) · Aluminum
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error