bolts › internal wrenching bolts
MS20007-23
Military Standard Internal Wrenching Bolt
Description
Thread: 7/16-20, Length: 2-1/4", Drive Style: Hexagon, Material: Steel, Surface Treatment: Cadmium and Chromate, Tensile Strength: 160000, MS20007 series bolt
Specifications
| Drive Style | Hexagon |
|---|---|
| Fastener Length | Between 2.235 inches and 2.265 inches |
| Hardness Rating | 34.0 rockwell c and 40.0 rockwell c |
| Head Diameter | Between 0.74 inches and 0.75 inches |
| Head Height | 0.438 |
| Head Style | Bevel-conical |
| Internal Drive Style | Hexagon |
| Length | 2 1/4 |
| Material | Steel |
| Material Specification | Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6049 military specification 5th material response |
| Min. Tensile Strength (psi) | 160000 pounds per square inch |
| Surface Treatment | Cadmium and chromate |
| Surface Treatment Specification | Type 2 cl 2 federal specification single treatment response qq-p-416 |
| Thread Class | 3a |
| Thread Diameter | 0.438 |
| Thread Direction | Right-hand |
| Thread Length | Between 0.787 inches and 0.837 inches |
| Thread Qty | 20 |
| Thread Qty Per Inch (tpi) | 20 |
| Thread Series | UNF |
| Thread Series Designator | Unf (fine thread) |
| Thread Size | 7/16 |
| Width Across Flats | Between 0.313 inches and 0.315 inches |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- MS20007-14 MS 7/16-20 · 0.086 in · Bevel-conical · Steel
- MS20007-6 MS 7/16-20 · 0.086 in · Bevel-conical · Steel
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error