screws › machine screws
MS18211-105F
Military Standard Screw
Description
Fastener Length: 1-3/16", Thread: 10-32, Thread Length: 1-3/64"
Specifications
| Countersink Angle | 100.0 degrees |
|---|---|
| Fastener Length | 1.188 inches minimum and 1.250 inches maximum |
| Head Diameter | 0.333 inches minimum and 0.385 inches maximum |
| Head Style | Flat countersunk |
| Internal Drive Style | Slot |
| Length | 1 1/4 |
| Nondefinitive Specification/Std Data | 1 type and 3s style |
| Screw Material | Plastic polyhexamethylene amide |
| Screw Material Specification | Mil-m-20693,ty 1 mil spec single material response |
| Thread Class | 2a |
| Thread Diameter | 0.190 |
| Thread Direction | Right-hand |
| Thread Length | 1.043 inches minimum and 1.167 inches maximum |
| Thread Qty | 32 |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series Designator | UNF |
| Thread Size | 10 |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- NAS1102E3-20 NAS #10-32 · 0.073 in · Flat countersunk · Iron
- NAS514P1032-20P NAS #10-32 · 0.073 in · Flat countersunk · Steel
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error