rivets › solid rivets
MS14218AD6-10
Military Standard Solid Rivet
Description
Fastener Length: 5/8, roughly 540 pieces per pound
Specifications
| Countersink Angle | Between 118.5 degrees and 121.5 degrees |
|---|---|
| Fastener Length | Between 0.615 inches and 0.635 inches |
| Head Height | 0.044 |
| Head Major Diameter | Between 0.256 inches and 0.258 inches |
| Head Style | Countersunk w/ reverse chamfer |
| Heat Treatment | T-4 solution heat treated |
| Material | Aluminum |
| Material Specification | Qq-a-430 federal specification single material response |
| Min. Tensile Strength (psi) | 38000 pounds per square inch |
| Minimum Yield Strength | 18000 pounds per square inch |
| Shank Diameter | Between 0.186 inches and 0.189 inches |
| Shank Style | Straight w/radius chamfered tip |
| Shear Strength | 26000 single pounds per square inch |
| Surface Treatment | Anodize |
| Surface Treatment Specification | Cl 1 military specification single treatment response type 2 mil-a-8625 |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
- MS14218AD6-4
- MS14218AD6-5
- MS14218AD6-6
- MS14218AD6-7R
- MS14218AD6-8
- MS14218AD6-9
- MS14218AD6-10
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- MS14218T6-10 MS 5/8 in · Countersunk w/ reverse chamfer · Titanium
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error