screws › close tolerance screws
HT4067-5-9A
Screw
Description
Fastener Length: 1-7/64", Thread: 1/4-24, Thread Length: 35/64"
Specifications
| Countersink Angle | 99.0 degrees minimum and 101.0 degrees maximum |
|---|---|
| Fastener Length | 1.079 inches minimum and 1.109 inches maximum |
| Grip Diameter | 0.3110 inches minimum and 0.3120 inches maximum |
| Grip Length | 0.552 inches minimum and 0.572 inches maximum |
| Head Diameter | 0.629 inches minimum and 0.633 inches maximum |
| Head Height | 0.088 inches minimum and 0.090 inches maximum |
| Head Style | Flat countersunk undercut |
| Internal Drive Style | High-torque |
| Length | 1 7/64 |
| Material | Steel |
| Special Features | Furnished with one o-ring |
| Surface Finish | 32.0 microinches grip, 32.0 microinches threads |
| Surface Treatment | Aluminum and chromate |
| Surface Treatment Specification | Mil-c-83488,type2,class 3 mil spec single treatment response |
| Thread Class | 3a |
| Thread Diameter | 0.312 |
| Thread Direction | Right-hand |
| Thread Length | 0.507 inches minimum and 0.557 inches maximum |
| Thread Qty | 24 |
| Thread Qty Per Inch (tpi) | 24 |
| Thread Series Designator | UNJF |
| Thread Size | 1/4 |
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- 3M925C5-9A Commercial 1/4-24 · 0.073 in · Flat countersunk undercut · Steel
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error