rivets › pin-rivets
HL65PB6-14
Hi-Lok™Rivet Pin
Description
Flush ms24694 tension head, oversized for hl21, alloy steel cadmium plated
Specifications
| Countersink Angle | 100.0 degrees |
|---|---|
| Fastener Length | 1.190 inches minimum and 1.210 inches maximum |
| Grip Length | 0.870 inches minimum and 0.880 inches maximum |
| Head Major Diameter | 0.3765 inches minimum and 0.3813 inches maximum |
| Head Style | Flush countersunk |
| Lubrication | Cetyl alcohol, spec 305, hi-shear corp |
| Material | Steel |
| Material Specification | Mil-s-5000 mil spec single material response or mil-s-5626 mil spec single material response or mil-s-6049 mil spec single material response |
| Min. Tensile Strength (psi) | 3180 pounds per square inch |
| Shank Diameter | 0.2016 inches minimum and 0.2026 inches maximum |
| Shank Style | Pin-rivet, straight, threaded |
| Shear Strength | 6130 double pounds per square inch |
| Special Features | 1/64" oversized. |
| Specification Data | 73197-hl65 manufacturers standard |
| Surface Treatment | Cadmium |
| Surface Treatment Specification | Qq-p-416 fed spec single treatment response |
| Thread Class | 3a |
| Thread Direction | Right-hand |
| Thread Series Designator | UNJF |
| Thread Size | 0.190 |
| Width Between Flats | 0.0791 inches minimum and 0.0806 inches maximum |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
No interchangeable or dimensionally similar parts are on record for HL65PB6-14. Try the cross-reference lookup to search by a different part number.
Catalog data updated 2026-07-05. Report a data error