rivets › pin-rivets
HL30-6-5
Hi-Lok™Rivet Pin
Description
protruding shear head - 431 stainless steel
Specifications
| Fastener Length | 0.627 inches minimum and 0.647 inches maximum |
|---|---|
| Grip Length | 0.307 inches minimum and 0.317 inches maximum |
| Head Height | 0.045 inches minimum and 0.055 inches maximum |
| Head Major Diameter | 0.295 inches minimum and 0.315 inches maximum |
| Lubrication | Cetyl alcohol |
| Material | Steel |
| Material Specification | Mil-s-18732 mil spec single material response |
| Shank Diameter | 0.189 inches minimum and 0.190 inches maximum |
| Shear Strength | 7060 double pounds per square inch |
| Surface Treatment | Passivate |
| Surface Treatment Specification | 258,fscm 73197 mfr ref single treatment response |
| Thread Class | 3a |
| Thread Direction | Right-hand |
| Thread Series Designator | UNJF |
| Thread Size | 0.190 |
| Width Between Flats | 0.079 inches minimum and 0.081 inches maximum |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- HL10V6-5 Hi-Lok #10 · 21/32 in · Titanium
- HL10VAP6-5 Hi-Lok #10 · 21/32 in · Titanium
- HL10VAZ6-5 Hi-Lok #10 · 21/32 in · Titanium
- HL10VF6-5 Hi-Lok #10 · 21/32 in · Titanium
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error