pins › pin-rivets
HL221-6-9
Hi-Lok™Rivet Pin
Description
flush tension head, oversized for HL21, alloy steel, cadmium plated, HL221 series pin
Specifications
| Countersink Angle | 100.0 degrees |
|---|---|
| Fastener Length | 0.8775 inches minimum and 0.8975 inches maximum |
| Grip Length | 0.5575 inches minimum and 0.5675 inches maximum |
| Head Major Diameter | 0.3765 inches minimum and 0.3813 inches maximum |
| Head Style | Flush countersunk |
| Lubrication | Cetyl alcohol, spec 305, hi-shear corp |
| Material | Steel |
| Material Specification | Mil-s-5000 mil spec single material response or mil-s-5626 mil spec single material response or mil-s-6049 mil spec single material response |
| Min. Tensile Strength (psi) | 160000 pounds per square inch |
| Shank Diameter | 0.2172 inches minimum and 0.2182 inches maximum |
| Shank Style | Pin-rivet, straight, threaded |
| Shear Strength | 7100 double pounds per square inch |
| Surface Treatment | Cadmium |
| Surface Treatment Specification | Qq-p-416,typ ii,class 2 fed spec single treatment response |
| Thread Class | 3a |
| Thread Direction | Right-hand |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series Designator | UNJF |
| Thread Size | 0.190 |
| Width Between Flats | 0.0791 inches minimum and 0.0806 inches maximum |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
- HL221-6-7
- HL221-6-8
- HL221-6-9
- HL221-6-10
- HL221-6-11
- HL221-6-12
Cross-reference
No interchangeable or dimensionally similar parts are on record for HL221-6-9. Try the cross-reference lookup to search by a different part number.
Catalog data updated 2026-07-05. Report a data error