pins › pin-rivets
HL220-6-12
Hi-Lok™Rivet Pin
Description
protruding tension head oversized for hl20, alloy steel cadmium plated
Specifications
| Fastener Length | 1.065 inches minimum and 1.085 inches maximum |
|---|---|
| Grip Length | 0.755 inches maximum |
| Head Height | 0.064 inches minimum and 0.074 inches maximum |
| Head Major Diameter | 0.370 inches minimum and 0.390 inches maximum |
| Lubrication | Cetyl alcohol |
| Material | Steel |
| Material Specification | Mil-s-5000 mil spec 1st material response or mil-s-5000 mil spec 2nd material response or mil-s-5626 mil spec 3rd material response or mil-s-6049 mil spec 4th material response |
| Min. Tensile Strength (psi) | 160000 pounds per square inch |
| Shank Diameter | 0.2172 inches minimum and 0.2182 inches maximum |
| Shank Style | Pin-rivet, straight, threaded |
| Shear Strength | 95000 single pounds per square inch |
| Special Features | Head style a34 flat chamfer |
| Surface Treatment | Cadmium |
| Surface Treatment Specification | Qq-p-416,ty 2,cl 3 fed spec single treatment response |
| Thread Class | 3a |
| Thread Direction | Right-hand |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series Designator | UNJF |
| Thread Size | 0.190 |
| Width Between Flats | 0.079 inches minimum and 0.081 inches maximum |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
No interchangeable or dimensionally similar parts are on record for HL220-6-12. Try the cross-reference lookup to search by a different part number.
Catalog data updated 2026-07-05. Report a data error