rivets › blind rivets
CR9162-4-02
Cherrymax®Blind Rivet
Description
diameter: 1/8", grip range: 0.063" - 0.125", 100°, flush head - self plugging - 2117 aluminum sleeve - 2017 aluminum stem
Specifications
| Countersink Angle | 99.0 degrees minimum and 101.0 degrees maximum |
|---|---|
| Expansion Device | Serrated stem-type w |
| Fastener Length | 0.232 inches maximum |
| Grip Length | 0.063 inches minimum and 0.125 inches maximum |
| Head Major Diameter | 0.221 inches minimum and 0.229 inches maximum |
| Head Style | Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) |
| Material | Aluminum |
| Material Specification | Qq-a-430 fed spec single material response body, Qq-a-430 fed spec single material response stem |
| Shank Diameter | 0.124 inches minimum and 0.128 inches maximum |
| Shank Style | Self-plugging |
| Shear Strength | 240 single pounds per square inch |
| Special Features | W/special pulling head |
| Surface Treatment | Anodize or chromate |
| Surface Treatment Specification | Mil-a-8625 mil spec 1st treatment response sleeve or mil-c-5541 mil spec 2nd treatment response sleeve, Mil-a-8625 mil spec 1st treatment response stem or mil-c-5541 mil spec 2nd treatment response stem |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- MS20605S4W2 MS 15/64 in · Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) · Steel
- NAS9308ML-4-02 NAS 15/64 in · Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) · CRES
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error