rivets › blind rivets
CR9116-3-04
Cherrymax®Blind Rivet
Description
Blind Rivet
Specifications
| Countersink Angle | Between 99.0 degrees and 101.0 degrees |
|---|---|
| Expansion Device | Serrated stem-type w |
| Fastener Length | 0.328 |
| Grip Length | Between 0.188 inches and 0.250 inches |
| Head Major Diameter | 0.179 |
| Head Style | Flush (flat) countersunk (included angle - less than 135 degrees w or w/o chamfer) |
| Material | Aluminum |
| Material Specification | Mil-w-7986 military specification single material response |
| Shank Diameter | Between 0.093 inches and 0.097 inches |
| Shank Style | Pull through hollow shank |
| Shear Strength | 70 single pounds per square inch |
| Surface Treatment | Anodize or oxide film |
| Surface Treatment Specification | Mil-a-8625 military specification 1st treatment response or mil-c-5541 military specification 2nd treatment response |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
- CR9116-3-04
- CR9116-3-4
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- MS20605AD3C4 MS 21/64 in · Aluminum
- MS20605AD3W4 MS 21/64 in · Aluminum
- MS20605MP3W4 MS 21/64 in · Nickel
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error