rivets › solid rivets
BACR15DP6D5
Solid Rivet
Description
Fastener Length: 5/16"
Specifications
| Countersink Angle | 99.5 degrees minimum and 100.5 degrees maximum |
|---|---|
| Fastener Length | 0.302 inches minimum and 0.322 inches maximum |
| Head Major Diameter | 0.349 inches minimum and 0.357 inches maximum |
| Head Style | Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) |
| Heat Treatment | T-3 solution heat treated |
| Material | Aluminum |
| Material Specification | Mil-r-5674 mil spec single material response |
| Shank Diameter | 0.186 inches minimum and 0.190 inches maximum |
| Shank Style | Straight w/radius chamfered tip |
| Special Features | Head marking,raised dot color blue |
| Surface Treatment | Anodize |
| Surface Treatment Specification | Mil-a-8625,ty 2 mil spec single treatment response |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
- BACR15DP6D5
- BACR15DP6D9
- BACR15DP6D10
- BACR15DP6D12
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- MS20426A6-5 MS 21/64 in · Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) · Aluminum
- MS20426E6-5 MS 21/64 in · Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) · Aluminum
- MS20427M6-5 MS 21/64 in · Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) · Nickel
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error