rivets › solid rivets
BACR15DP4AD4
Solid Rivet
Description
Fastener Length: 1/4"
Specifications
| Countersink Angle | 99.5 degrees minimum and 100.5 degrees maximum |
|---|---|
| Fastener Length | 0.240 inches minimum and 0.260 inches maximum |
| Head Major Diameter | 0.221 inches minimum and 0.229 inches maximum |
| Head Style | Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) |
| Material | Aluminum |
| Material Specification | Qq-a-430 fed spec single material response |
| Shank Diameter | 0.124 inches minimum and 0.128 inches maximum |
| Shank Style | Straight |
| Shear Strength | 26000 single pounds per square inch |
| Surface Treatment | Anodize |
| Surface Treatment Specification | Mil-a-8625,type 2 mil spec single treatment response |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- MS20426E4-4 MS 0.260 in · Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) · Aluminum
- MS20426T4-4 MS 0.260 in · Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) · Titanium
- MS20470E5-14A MS 0.260 in · Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) · Aluminum
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error