Spec hardware, served at warp speed.

nuts › clip-on nuts

BACN10JR3R

Two Lug Locknut Plate

View quote list → Saved parts →

Description

Thread Size: 3/16", Nut Length: 15/16", Nut Height: 1/4"

Specifications

Center To Center Distance Between Mounting Holes Along Length 0.686 inches minimum and 0.690 inches maximum
Counterbore Diameter 0.194 inches minimum nut
Distance From Aperture Center To Mounting Hole Center 0.339 inches minimum and 0.349 inches maximum
Locking Feature Prevailing torque all metal design
Lubrication Dry film lubricant
Material Steel
Material Specification 66 fed std all material responses
Mounting Hole Arrangement Style 2 holes
Mounting Hole Countersink Angle 98.0 degrees minimum and 102.0 degrees maximum
Mounting Hole Diameter 0.098 inches minimum and 0.103 inches maximum
Mounting Provision Location Opposite nut projection side
Nut Counterbore Depth 0.060 inches nominal nut
Nut Height 0.250 inches maximum
Nut Length 0.948 inches maximum
Nut Mounting Provision Countersunk holes
Nut Style Plate
Plate Thickness 0.047 inches maximum
Plate Width 0.328 inches maximum
Specification Data 81205-bacn10jr manufacturers standard
Surface Treatment Cadmium
Surface Treatment Specification Qq-p-416,type 2,class 3 fed spec single treatment response
Temperature Rating 450.0 deg fahrenheit
Thread Class 3b
Thread Direction Right-hand
Thread Qty 32
Thread Qty Per Inch (tpi) 32
Thread Series UNJF
Thread Size 0.190

Other sizes

Parts that share this base number, ordered by size. Always verify the full specification before substituting.

Cross-reference

Interchangeable

Parts that share a National Stock Number or are listed as an alternate for BACN10JR3R — functionally equivalent.

Similar parts

Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.

Looking for a specific part? Use the cross-reference lookup.

Catalog data updated 2026-07-05. Report a data error