rivets › solid rivets
AS125274
Solid Rivet
Description
Fastener Length: 1/2"
Specifications
| Countersink Angle | 99.5 degrees minimum and 100.5 degrees maximum |
|---|---|
| Fastener Length | 0.428 inches minimum and 0.448 inches maximum |
| Grip Length | 0.297 nominal inches |
| Head Major Diameter | 0.175 inches minimum and 0.183 inches maximum |
| Head Style | Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) |
| Material | Aluminum |
| Material Specification | Qq-a-430 fed spec single material response |
| Shank Diameter | 0.093 inches minimum and 0.097 inches maximum |
| Shank Style | Straight w/radius chamfered tip |
| Shear Strength | 26000 single pounds per square inch |
| Surface Treatment | Anodize or oxide film |
| Surface Treatment Specification | Mil-a-8625 mil spec 1st treatment response or mil-c-5541 mil spec 2nd treatment response |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- MS20427-3C7 MS 29/64 in · Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) · Steel
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error