washers › flat washers
AN960PD416
Aeronautical Standard Flat Washer
Description
AN960PD416
Specifications
| Alternate Part Number | AN960PD416 |
|---|---|
| Hole Diameter | 0.255 inches minimum and 0.275 inches maximum |
| Material | Aluminum |
| Material Specification | Qq-a-250/5 fed spec single material response |
| Nondefinitive Specification/Std Data | A type and 1 grade and a class |
| Overall Diameter | 0.495 inches minimum and 0.520 inches maximum |
| Surface Treatment | Anodize |
| Surface Treatment Specification | Mil-c-5541 mil spec 1st treatment response or mil-a-8625 mil spec 2nd treatment response |
| Thickness | 0.057 inches minimum and 0.069 inches maximum |
Cross-reference
Interchangeable
Parts that share a National Stock Number or are listed as an alternate for AN960PD416 — functionally equivalent.
- AN960-PD416 Listed alternate Aluminum
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- NAS1149C0463B NAS 1/4 · 0.520 in · CRES
- NAS1149C0463R NAS 1/4 · 0.520 in · Steel
- NAS1149D0463K NAS 1/4 · 0.520 in · Aluminum
- NAS1252-416H NAS 1/4 · 0.520 in · Aluminum
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error