washers › flat washers
AN960JD10LL
Aeronautical Standard Flat Washer
Description
Flat Washer
Specifications
| Alternate Part Number | NAS1149D0316J, AN960PD10L AN960JD10LL |
|---|---|
| Hole Diameter | 0.193 inches minimum and 0.213 inches maximum |
| Material | Aluminum |
| Material Specification | Qq-a-250/4,cond t3 fed spec single material response or qq-a-250/4,cond t4 fed spec single material response |
| Overall Diameter | 0.433 inches minimum and 0.458 inches maximum |
| Specification Data | 88044-an960 government standard |
| Surface Treatment | Chromate |
| Surface Treatment Specification | Mil-c-5541,cl3 mil spec single treatment response |
| Thickness | 0.016 |
Cross-reference
Interchangeable
Parts that share a National Stock Number or are listed as an alternate for AN960JD10LL — functionally equivalent.
- NAS1149D0316J Listed alternate #12 · 29/64 in · Aluminum
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- 861128-103 Commercial #12 · 29/64 in · CRES
- NAS1149C0316B NAS #12 · 29/64 in · Steel
- NAS1149C0316R NAS #12 · 29/64 in · Steel
- NAS1149D0316K NAS #12 · 29/64 in · Aluminum
- NAS1149E0316R NAS #12 · 29/64 in · Iron
- NAS1149F0316P NAS #12 · 29/64 in · Steel
- AN960KD10L AN #12 · 29/64 in · Aluminum
- AN960KD10LL AN #12 · 29/64 in · Aluminum
- AN960XC10LL AN #12 · 29/64 in · CRES
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error