fittings › pipe tees
AN917-2J
1/4 Pipe Thread AN917 Internal Threaded Pipe Tee
Description
1/4 Pipe Thread AN917 Internal Threaded Pipe Tee
Specifications
| Alternate Part Number | AS4857J02 |
|---|---|
| Connection Style | Plain (pipe) all ends |
| Connection Type | Threaded internal pipe all ends |
| Diameter P | 25/32 in |
| Dimension B | 1 25/32 in |
| Dimension B Tolerance | +3/64 in |
| Dimension C | 13/16 in |
| Industry Standards/Certification | AN917 |
| Leg Length | 0.807 inches minimum 1st end and 0.891 inches maximum 1st end, 0.807 inches nominal 2nd end, 0.840 inches nominal 3rd end |
| Material | CRES |
| Material Specification | 66 fed std single material response |
| NIIN | 00-541-2745 |
| NSN | 4730-00-541-2745 |
| Pipe Thread Size (ANPT) | 1/4 |
| Specification Data | 88044-an917 government standard |
| Surface Treatment | Passivate |
| Surface Treatment Specification | Mil-f-14072,e300,ty2 mil spec single treatment response outside, Mil-s-5002 mil spec single treatment response inside |
| Thread Series Designator | Anpt all ends |
| Thread Size | 0.250 inches all ends |
| Thread Type | Aeronautical National Pipe Thread |
| Weight | .005 lb |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
Interchangeable
Parts that share a National Stock Number or are listed as an alternate for AN917-2J — functionally equivalent.
- AS4857J02 Listed alternate 1/4 in · Steel
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error