fittings › tube tees
AN824-12D
AN Fitting AN824-12D Tee
Description
Tee
Specifications
| Alternate Part Number | AS1035D121212 |
|---|---|
| Approximate Dimension V | 1 1/16 in |
| Approximate Dimension W | 29/32 in |
| Connection Style | Flared (tube) all ends |
| Connection Type | Flared Tube, Threaded external tube all ends |
| Dimension Q | 1 5/8 in |
| Dimension Q Tolerance | -0 in |
| Flared Tube Angle | 37 º |
| Industry Standards/Certification | AN824 |
| Leg Length | 1.625 inches 1st end |
| Material | Aluminum |
| Material Specification | T6 federal specification single material response t851 federal specification single material response or qq-a-367 t6 federal specification single material response or qq-a-225/6 t6 federal specification single material response or qq-a-225/6 qq-a-225/4 |
| Outside Diameter Tube Accommodated | 0.750 inches all ends |
| Seat Angle | 37.0 degrees all ends |
| Size No. Alum | 12D |
| Size No. Steel | 12 |
| Surface Treatment | Anodize |
| Surface Treatment Specification | Mil-a-8625 military specification single treatment response inside, Mil-a-8625 military specification single treatment response outside |
| Thread Class | 3a all ends |
| Thread Qty | 12 |
| Thread Qty Per Inch (tpi) | 12 all ends |
| Thread Series | UNJ |
| Thread Series Designator | Unj all ends |
| Thread Size | 1 1/16-12, 1.062 inches all ends |
| Thread T (Reference) | 1 1/16-12 |
| Tube O.D. | 3/4 |
| Tube Outside Diameter | 3/4 in |
| Weight | 0.265 lb |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
Interchangeable
Parts that share a National Stock Number or are listed as an alternate for AN824-12D — functionally equivalent.
- AS1035D121212 Listed alternate 1-1/16-12 · Aluminum
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error