fittings › boss nipples
AN806D16
Aeronautical Standard Threaded Tube Fitting Plug
Description
Pressure Plug
Specifications
| Connection Style | Flared |
|---|---|
| Head Height | Between 0.328 inches and 0.370 inches |
| Iii End Application | Grumman a-10 aircraft; mrap buffalo mk2a2 |
| Material | Aluminum |
| Material Specification | T6 federal specification 2nd material response t6 federal specification 1st material response or qq-a-225/6 qq-a-225/4 |
| NIIN | 00-287-0118 |
| NSN | 4730-00-287-0118 |
| Overall Length | Between 0.370 inches and 0.391 inches |
| Seat Angle | 37.0 degrees |
| Special Features | 0.828 in.id by 0.391 in.deep at bottom drilled hole |
| Style Designator | Should not be considered as a separating characteristic) tube fitting flared (note: drilled hole is optional plug |
| Surface Treatment | Anodize |
| Surface Treatment Specification | Type 2 cl 2 military specification single treatment response mil-a-8625 |
| Thread Class | 3a external |
| Thread Direction | Right-hand external |
| Thread Qty | 12 |
| Thread Qty Per Inch (tpi) | 12 external |
| Thread Series | UN |
| Thread Series Designator | Un external |
| Thread Size | 1.312 inches external |
| Weight | 0.115 lb |
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- AS5168D16 AS 1-5/16-12 · Aluminum
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error