clamps › loop clamps
AN742F4
Aeronautical Standard Loop Clamp
Description
Diameter: 13/64", steel comp 302 overall
Specifications
| Center To Center Distance Between Loop And Mounting Hole | 0.442 inches minimum and 0.472 inches maximum |
|---|---|
| Diameter | 0.204 |
| Distance From Loop Center To Tongue End | 0.630 inches minimum and 0.660 inches maximum |
| Loop Inside Diameter | 0.235 inches minimum and 0.265 inches maximum |
| Material | CRES |
| Material Specification | Mil-s-5059 mil spec single material response |
| Material Thickness | 0.017 inches minimum and 0.023 inches maximum |
| Overall Width | 0.360 inches minimum and 0.390 inches maximum |
| Specification Data | 88044-an742 government standard |
| Style Designator | Single loop |
| Surface Treatment | Passivate |
| Surface Treatment Specification | Astm a-380 national spec single treatment response |
| Tongue Hole Type | Round, unthreaded |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
No interchangeable or dimensionally similar parts are on record for AN742F4. Try the cross-reference lookup to search by a different part number.
Catalog data updated 2026-07-05. Report a data error