bolts › machine bolts
AN7-21
Aeronautical Standard Machine Bolt
Description
Airframe Bolt, Drilled
Specifications
| Country of Origin | USA |
|---|---|
| Distance From Head Largest Bearing Surface To Shank Hole Center | 2.031 inches minimum first hole and 2.062 inches maximum first hole |
| Drilling | Drilled Head |
| Fastener Length | 2.203 inches minimum and 2.250 inches maximum |
| Features Provided | Finished head |
| Grip | 1 9/16 in |
| Grip Length | 1 9/16, 1.547 inches minimum and 1.578 inches maximum |
| Hardness Rating | 26.0 rockwell c minimum and 32.0 rockwell c maximum |
| Head Height | 0.234 inches minimum and 0.266 inches maximum |
| Head Style | Hexagon Head |
| Head Type | Hexagon |
| Industry Standards/Certification | AN7 |
| Length | 2 1/4, 2 7/32 in |
| Material | Steel |
| Material Specification | Mil-s-5626 mil spec 1st material response or mil-s-6049 mil spec 2nd material response or mil-s-5050 mil spec 3rd material response or mil-s-6098 mil spec 4th material response or mil-s-6758 mil spec 5th material response or ams 6300 assn std 6th material response |
| Min. Tensile Strength (psi) | 125000 pounds per square inch |
| NIIN | 00-150-9606 |
| NSN | 5306-00-150-9606 |
| Nominal Length | 2 7/32 |
| Shank Unthreaded Hole Diameter | 0.106 inches minimum first hole and 0.116 inches maximum first hole |
| Surface Treatment | Cadmium |
| Surface Treatment Specification | Qq-p-416,type 2,class 3 fed spec single treatment response |
| Thread Class | 3a |
| Thread Diameter | 0.438 |
| Thread Direction | Right-hand |
| Thread Length | 0.625 inches minimum and 0.703 inches maximum |
| Thread Qty | 20 |
| Thread Qty Per Inch (tpi) | 20 |
| Thread Series Designator | UNF |
| Thread Size | 7/16-20 |
| Weight | 0.111 lb |
| Width Between Flats | 0.615 inches minimum and 0.627 inches maximum |
Cross-reference
No interchangeable or dimensionally similar parts are on record for AN7-21. Try the cross-reference lookup to search by a different part number.
Catalog data updated 2026-07-05. Report a data error