bolts › machine bolts
AN6CH7A
Aeronautical Standard Machine Bolt
Description
Fastener Length: 15/16", Hole Diameter: 1/16", Thread: 3/8-24, Thread Length: 41/64"
Specifications
| Fastener Length | 0.953 |
|---|---|
| Features Provided | Finished head |
| Grip Length | 0.312 |
| Hardness Rating | 26.0 rockwell c minimum and 32.0 rockwell c maximum |
| Head Height | 0.203 inches minimum and 0.235 inches maximum |
| Head Style | Hexagon Head |
| Hole Configuration Style | Hexagon flats |
| Hole Diameter | 0.070 |
| Hole Quantity | 1 |
| Hole Type | Drilled |
| Length | 15/16 |
| Material | Steel |
| Material Specification | Qq-s-770 fed spec single material response |
| Min. Tensile Strength (psi) | 125000 pounds per square inch |
| Surface Treatment | Passivate |
| Thread Class | 3a |
| Thread Diameter | 0.375 |
| Thread Direction | Right-hand |
| Thread Length | 0.641 inches minimum |
| Thread Qty | 24 |
| Thread Qty Per Inch (tpi) | 24 |
| Thread Series Designator | UNF |
| Thread Size | 3/8 |
| Width Between Flats | 0.553 inches minimum and 0.565 inches maximum |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error