screws › setscrews
AN565DC4H4
Aeronautical Standard Setscrew
Description
Fastener Length: 1/4", Thread: 4-40, Head Width: 1/16", Thread Length: 1/4", AN565 series screw
Specifications
| Description | Set Screw MS51021-11 |
|---|---|
| Fastener Length | 0.250 |
| Head Style | Headless (setscrew) |
| Internal Drive Style | Hexagon |
| Length | 1/4 |
| Material | CRES |
| Material Specification | Mil-s-7720 mil spec single material response |
| Point Style | Cup |
| Surface Treatment | Passivate |
| Thread | 4-40 |
| Thread Class | 3a |
| Thread Diameter | 0.112 |
| Thread Direction | Right-hand |
| Thread Length | 0.250 inches maximum |
| Thread Qty | 40 |
| Thread Qty Per Inch (tpi) | 40 |
| Thread Series Designator | UNC |
| Thread Size | 4 |
| Width Across Flats | 0.051 |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
- AN565DC4H2
- AN565DC4H3
- AN565DC4H4
- AN565DC4H5
- AN565DC4H8
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- MS18064-10 MS #4-40 · 1/4 in · Headless (setscrew) · CRES
- MS51021-11 MS #4-40 · 1/4 in · Headless (setscrew) · CRES
- MS51963-11 MS #4-40 · 1/4 in · Headless (setscrew) · Steel
- MS51965-10 MS #4-40 · 1/4 in · Headless (setscrew) · Steel
- AN565FC4H4 AN #4-40 · 1/4 in · Headless (setscrew) · CRES
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error