screws › machine screws
AN525-8R10
Aeronautical Standard Machine Screw
Description
Fastener Length: 21/32", Thread: 8-36, Thread Length: 25/64"
Specifications
| Extended Washer Diameter | 0.375 |
|---|---|
| Extended Washer Thickness | 0.018 inches minimum and 0.028 inches maximum |
| Fastener Length | 0.594 inches minimum and 0.656 inches maximum |
| Hardness Rating | 26.0 rockwell c minimum and 32.0 rockwell c maximum |
| Head Diameter | 0.312 |
| Head Height | 0.082 inches minimum and 0.092 inches maximum |
| Head Style | Round extended washer |
| Internal Drive Style | Cross recess type 1 |
| Length | 21/32 |
| Material | Steel |
| Min. Tensile Strength (psi) | 125000 pounds per square inch |
| Screw Material | Steel |
| Screw Material Specification | Qq-s-689 /cancelled/ fed spec single material response |
| Screw Surface Treatment | Cadmium or zinc |
| Screw Surface Treatment Specification | Qq-p-416 fed spec 1st treatment response or qq-z-325 fed spec 2nd treatment response |
| Thread Class | 3a |
| Thread Diameter | 0.164 |
| Thread Direction | Right-hand |
| Thread Length | 0.360 inches minimum and 0.391 inches maximum |
| Thread Qty | 36 |
| Thread Qty Per Inch (tpi) | 36 |
| Thread Series Designator | UNF |
| Thread Size | 8 |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
- AN525-8R6
- AN525-8R7
- AN525-8R8
- AN525-8R9
- AN525-8R10
- AN525-8R12
- AN525-8R16
- AN525-8R18
Cross-reference
No interchangeable or dimensionally similar parts are on record for AN525-8R10. Try the cross-reference lookup to search by a different part number.
Catalog data updated 2026-07-05. Report a data error