screws › machine screws
AN525-10-14
Aeronautical Standard Screw
Description
AN 525-10-14 Washer Head Machine Screw
Specifications
| Extended Washer Diameter | 0.437 |
|---|---|
| Extended Washer Thickness | 0.025 |
| Fastener Length | 0.844 inches minimum and 0.906 inches maximum |
| Finish | Cadmium ll |
| Grip Length | 15/32 |
| Head Diameter | 0.375 |
| Head Height | 0.089 inches minimum and 0.099 inches maximum |
| Head Style | Round extended washer, Washer Head |
| Internal Drive Style | Slot |
| Length | 29/32, 7/8 |
| Material | Steel |
| Min. Tensile Strength (psi) | 100000 pounds per square inch |
| Screw Material | Steel |
| Screw Surface Treatment | Cadmium |
| Screw Surface Treatment Specification | An-p-61 fed spec single treatment response |
| Size | 10-32 |
| Thread Class | 3a |
| Thread Diameter | 0.190 |
| Thread Direction | Right-hand |
| Thread Length | 0.406 inches minimum |
| Thread Qty | 32 |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series Designator | UNF |
| Thread Size | 10 |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
No interchangeable or dimensionally similar parts are on record for AN525-10-14. Try the cross-reference lookup to search by a different part number.
Catalog data updated 2026-07-05. Report a data error