screws › machine screws
AN505C4R7
Aeronautical Standard Machine Screw
Description
Fastener Length: 7/16", Thread: 4-40, Thread Length: 25/64"
Specifications
| Countersink Angle | 80.0 degrees minimum and 82.0 degrees maximum |
|---|---|
| Fastener Length | 0.438 |
| Head Diameter | 0.195 inches minimum and 0.225 inches maximum |
| Head Style | Flat countersunk |
| Internal Drive Style | Cross recess type 1 |
| Length | 7/16 |
| Material | Steel |
| Min. Tensile Strength (psi) | 80000 pounds per square inch |
| Screw Material | Steel comp 302 or steel comp 303 or steel comp 304 or steel comp 305 or steel comp 316 |
| Screw Material Specification | 66 fed std all material responses |
| Screw Surface Treatment | Passivate |
| Screw Surface Treatment Specification | Qq-p-35 fed spec single treatment response |
| Thread Class | 2a |
| Thread Diameter | 0.112 |
| Thread Direction | Right-hand |
| Thread Length | 0.388 inches minimum and 0.438 inches maximum |
| Thread Qty | 40 |
| Thread Qty Per Inch (tpi) | 40 |
| Thread Series Designator | UNC |
| Thread Size | 4 |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
- AN505C4R7
- AN505C4R11
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- MS24693-A5 MS #4-40 · 7/16 in · Flat countersunk · Aluminum
- MS24693C5 MS #4-40 · 7/16 in · Flat countersunk · CRES
- MS24693S5 MS #4-40 · 7/16 in · Flat countersunk · Steel
- NAS1102-04-7 NAS #4-40 · 7/16 in · Flat countersunk · Steel
- NAS514P440-7 NAS #4-40 · 7/16 in · Flat countersunk · Steel
- NAS514P440-7P NAS #4-40 · 7/16 in · Flat countersunk · Steel
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error