screws › machine screws
AN505C2-4
Aeronautical Standard Machine Screw
Description
Fastener Length: 1/4", Thread: 2-56, Thread Length: 1/4
Specifications
| Countersink Angle | Between 80.0 degrees and 82.0 degrees |
|---|---|
| Fastener Length | Between 0.219 inches and 0.250 inches |
| Head Diameter | Between 0.147 inches and 0.172 inches |
| Head Style | Flat countersunk |
| Internal Drive Style | Cross recess type 1 |
| Length | 1/4 |
| Material | Steel |
| Min. Tensile Strength (psi) | 80000 pounds per square inch |
| Surface Treatment | Passivate |
| Surface Treatment Specification | Qq-p-35 federal specification single treatment response |
| Thread Class | 2a |
| Thread Diameter | 0.086 |
| Thread Direction | Right-hand |
| Thread Length | Between 0.214 inches and 0.250 inches |
| Thread Qty | 56 |
| Thread Qty Per Inch (tpi) | 56 |
| Thread Series Designator | Unc (coarse thread) |
| Thread Size | 2 |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- NAS662C2R4 NAS #2-56 · 1/4 in · Flat countersunk · Steel
- AN505-2R4 AN #2-56 · 1/4 in · Flat countersunk · Steel
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error