screws › machine screws
AN505-4-10
Aeronautical Standard Machine Screw
Description
Fastener Length: 5/8", Thread: 4-40, Thread Length: 5/8
Specifications
| Countersink Angle | 80.0 degrees minimum and 82.0 degrees maximum |
|---|---|
| Fastener Length | 0.625 |
| Head Diameter | 0.200 inches minimum and 0.225 inches maximum |
| Head Style | Flat countersunk |
| Internal Drive Style | Cross recess type 1 |
| Length | 5/8 |
| Material | Steel |
| Min. Tensile Strength (psi) | 55000 pounds per square inch |
| Nondefinitive Specification/Std Data | 1 type and 2s style |
| Screw Material | Steel comp 1010 |
| Screw Material Specification | Qq-s-671 fed spec single material response |
| Screw Surface Treatment | Cadmium |
| Screw Surface Treatment Specification | Qq-p-416,ty 1,cl 3 fed spec single treatment response |
| Thread Class | 2a |
| Thread Diameter | 0.112 |
| Thread Direction | Right-hand |
| Thread Length | 0.575 inches minimum and 0.625 inches maximum |
| Thread Qty | 40 |
| Thread Qty Per Inch (tpi) | 40 |
| Thread Series Designator | UNC |
| Thread Size | 4 |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
- AN505-4-6
- AN505-4-10
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- NAS1102-04-10 NAS #4-40 · 5/8 in · Flat countersunk · Steel
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error