screws › machine screws
AN503-416-10
Aeronautical Standard Machine Screw
Description
Fillister Head Screw - AN506-416-10
Specifications
| Country of Origin | USA |
|---|---|
| Drilling | Drilled Head |
| Drive Style | Slotted |
| Fastener Length | 0.594 inches minimum and 0.625 inches maximum |
| Hardness Rating | 26.0 rockwell c minimum and 32.0 rockwell c maximum |
| Head Diameter | 0.389 inches minimum and 0.414 inches maximum |
| Head Height | 0.161 inches minimum and 0.170 inches maximum |
| Head Hole Configuration Style | Round |
| Head Style | Fillister |
| Head Type | Fillister |
| Hole Diameter | 0.062 |
| Hole Quantity | 1 |
| Industry Standards/Certification | AN503 |
| Internal Drive Style | Slot |
| Length | 5/8 in |
| Material | Steel |
| Min. Tensile Strength (psi) | 125000 pounds per square inch |
| NIIN | 00-150-9268 |
| NSN | 5305-00-150-9268 |
| Screw Material | Steel comp 8630 |
| Screw Material Specification | Mil-s-6050 mil spec single material response or an-s-9 mil std single material response |
| Screw Surface Treatment | Cadmium |
| Screw Surface Treatment Specification | Qq-p-416,ty 1,cl 3 fed spec single treatment response |
| Sold In | Per Package |
| Thread Class | 3a |
| Thread Diameter | 0.250 |
| Thread Direction | Right-hand |
| Thread Length | 0.516 inches minimum and 0.579 inches maximum |
| Thread Qty | 20 |
| Thread Qty Per Inch (tpi) | 20 |
| Thread Series Designator | UNC |
| Thread Size | 1/4-28 |
| Weight | 0.01 lb |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
- AN503-416-8
- AN503-416-10
- AN503-416-12
- AN503-416-14
Cross-reference
No interchangeable or dimensionally similar parts are on record for AN503-416-10. Try the cross-reference lookup to search by a different part number.
Catalog data updated 2026-07-05. Report a data error