screws › machine screws
AN501D10-6
Aeronautical Standard Machine Screw
Description
Fastener Length: 3/8", Hole Diameter: 1/32", Thread: 10-32, Thread Length: 3/8
Specifications
| Fastener Length | 0.375 |
|---|---|
| Head Diameter | Between 0.292 inches and 0.313 inches |
| Head Height | Between 0.123 inches and 0.130 inches |
| Head Hole Configuration Style | Round |
| Head Style | Fillister |
| Hole Diameter | 0.046 |
| Hole Quantity | 1 |
| Internal Drive Style | Slot |
| Length | 3/8 |
| Material | Steel |
| Min. Tensile Strength (psi) | 80000 pounds per square inch |
| Screw Material | Steel comp 302 or steel comp 303 or steel comp 304 or steel comp 305 or steel comp 316 |
| Screw Material Specification | 66 federal standard all material responses |
| Screw Surface Treatment | Passivate |
| Screw Surface Treatment Specification | Qq-p-35 federal specification single treatment response |
| Thread Class | 2a |
| Thread Diameter | 0.190 |
| Thread Direction | Right-hand |
| Thread Length | Between 0.312 inches and 0.375 inches |
| Thread Qty | 32 |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series | UNF |
| Thread Series Designator | Unf (fine thread) |
| Thread Size | 10 |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
- AN501D10-6
- AN501D10-8
- AN501D10-10
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- AN501A10-6 AN #10-32 · 3/8 in · Fillister · Steel
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error