screws › machine screws
AN500A6-6
Aeronautical Standard Machine Screw
Description
Length: 0.375", drilled fillister head
Specifications
| Fastener Length | 0.375 |
|---|---|
| Head Diameter | 0.208 inches minimum and 0.226 inches maximum |
| Head Height | 0.089 inches minimum and 0.096 inches maximum |
| Head Hole Configuration Style | Round |
| Head Style | Fillister |
| Hole Diameter | 0.046 |
| Hole Quantity | 1 |
| Internal Drive Style | Slot |
| Min. Tensile Strength (psi) | 55000 pounds per square inch |
| Screw Material | Steel |
| Screw Material Specification | Qq-s-633 fed spec single material response |
| Screw Surface Treatment | Cadmium and chromate |
| Screw Surface Treatment Specification | Qq-p-416,type 2,class 3 fed spec single treatment response |
| Thread Class | 2a |
| Thread Diameter | 0.138 |
| Thread Direction | Right-hand |
| Thread Length | 0.313 inches minimum and 0.375 inches maximum |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series Designator | UNC |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
Interchangeable
Parts that share a National Stock Number or are listed as an alternate for AN500A6-6 — functionally equivalent.
- MS35265-28 Listed alternate #6-32 · 3/8 in · Drilled Fillister Head · Steel
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- AN500AD6-6 AN 3/8 in · Fillister · Steel
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error