screws › machine screws
AN500-8-8
Fill. Coarse Screw
Description
All part numbers will follow this format: AN###. To further distinguish between the part numbers, you'll notice that a dash ("-") has been added, followed by some specific variation of more numbers. If there is an "A" after the dash, the part is cadmium plated, Type II, Class 3, with a drilled head. If there is NOT an "A" after the dash, the part is Cadmium plated, Type I. AN500 (coarse thread) and AN501 (fine thread) slotted fillister head screws are fabricated from carbon steel. Tensile strength 55,000 PSI AN502 (fine thread) and AN503 (coarse thread) drilled head, slotted fillister head screws are fabricated from steel meeting specification MIL-S-6050. Tensile strength 125,000 PSI. Cadmium plated, Type II Class 3
Specifications
| Fastener Length | 0.500 |
|---|---|
| Head Diameter | 0.250 inches minimum and 0.270 inches maximum |
| Head Height | 0.106 inches minimum and 0.113 inches maximum |
| Head Style | Fillister |
| Internal Drive Style | Slot |
| Length | 1/2 |
| Length (in.) | 1/2 |
| MS Dash # | MS35265-45 |
| Material | Steel |
| Screw Material | Steel |
| Screw Surface Treatment | Cadmium |
| Thread Class | 2a |
| Thread Diameter | 0.164 |
| Thread Direction | Right-hand |
| Thread Length | 0.500 inches maximum |
| Thread Qty | 32 |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series Designator | UNC |
| Thread Size | 8-32 |
| Type | Coarse Thread |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
- AN500-8-6
- AN500-8-8
- AN500-8-10
- AN500-8-18
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- 655-520-9005 Commercial #8-32 · 1/2 in · Fillister · CRES
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error