bolts › machine bolts
AN4CH10
Aeronautical Standard Bolt
Description
Fastener Length: 1-", Hole Diameter: 1/32", Thread: 1/4-28, Thread Length: 15/32"
Specifications
| Distance From Head Largest Bearing Surface To Shank Hole Center | 0.874 inches nominal first hole |
|---|---|
| Fastener Length | 1.031 |
| Features Provided | Finished head |
| Grip Length | 0.562 |
| Head Height | 0.140 inches minimum and 0.172 inches maximum |
| Head Style | Hexagon Head |
| Hole Configuration Style | Hexagon flats |
| Hole Diameter | 0.046 |
| Hole Quantity | 1 |
| Hole Type | Drilled |
| Material | Steel |
| Material Specification | Qq-s-770 fed spec single material response |
| Min. Tensile Strength (psi) | 125000 pounds per square inch |
| Shank Unthreaded Hole Diameter | 0.076 inches minimum first hole |
| Surface Treatment | Passivate |
| Thread Class | 3a |
| Thread Diameter | 0.250 |
| Thread Direction | Right-hand |
| Thread Length | 0.469 inches minimum |
| Thread Qty | 28 |
| Thread Qty Per Inch (tpi) | 28 |
| Thread Series Designator | UNF |
| Thread Size | 1/4 |
| Width Between Flats | 0.428 inches minimum and 0.440 inches maximum |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error