bolts › eye bolts
AN46-14A
Aeronautical Standard Bolt
Description
Eye bolts are special purpose bolts to be used where external tension loads are to be applied. The eye is designed for attachment of such devices as a turnbuckle fork, a clevis or a cable shackle. Manufactured and plated in same manner as AN3 - AN8 bolts . Minimum tensile strength 125, 000 PSI . Eye bolts will be furnished with either drilled or undrilled shank subject to stock on hand. Add letter "A" after dash number for undrilled shank. Shank 3/8" Hole 3/8" Thread 3/8-24. For "Undrilled" use "A" at end of part number
Specifications
| Eye Inside Diameter | 0.375 inches minimum and 0.378 inches maximum |
|---|---|
| Grip Length | 15/16 |
| Material | Steel |
| Nominal Length | 1 1/2 |
| Overall Length | 1.985 |
| Shank Length | 1.578 |
| Shoulder Diameter | 0.750 |
| Style Designator | Round, closed w/shoulder |
| Surface Treatment | Cadmium |
| Thread Class | 3a |
| Thread Diameter | 0.375 |
| Thread Direction | Right-hand |
| Thread Length | 0.640 inches minimum |
| Thread Qty | 24 |
| Thread Qty Per Inch (tpi) | 24 |
| Thread Series Designator | UNF |
| Thread Size | 3/8 |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
No interchangeable or dimensionally similar parts are on record for AN46-14A. Try the cross-reference lookup to search by a different part number.
Catalog data updated 2026-07-05. Report a data error