bolts › eye bolts
AN44-7
Aeronautical Standard Bolt
Description
Eye bolts are special purpose bolts to be used where external tension loads are to be applied. The eye is designed for attachment of such devices as a turnbuckle fork, a clevis or a cable shackle. Manufactured and plated in same manner as AN3 - AN8 bolts . Minimum tensile strength 125, 000 PSI . Eye bolts will be furnished with either drilled or undrilled shank subject to stock on hand. Add letter "A" after dash number for undrilled shank. Shank 5/16" Hole 1/4" Thread 5/16-24. For "Undrilled" use "A" at end of part number
Specifications
| Eye Inside Diameter | 0.250 inches minimum and 0.253 inches maximum |
|---|---|
| Grip Length | 7/16 |
| Hardness Rating | 26.0 rockwell c minimum and 32.0 rockwell c maximum |
| Material | Steel |
| Material Specification | Mil-s-5626 mil spec 1st material response or mil-s-6049 mil spec 2nd material response or mil-s-6050 mil spec 3rd material response or mil-s-6098 mil spec 4th material response or mil-s-6758 mil spec 5th material response or mil-s-8695 mil spec 6th material response |
| Min. Tensile Strength (psi) | 125000 pounds per square inch |
| Nominal Length | 7/8 |
| Overall Length | 1.859 |
| Shank Length | 0.953 inches minimum and 1.000 inches maximum |
| Shank Unthreaded Hole Diameter | 0.106 inches nominal first hole |
| Shoulder Diameter | 0.625 |
| Style Designator | Round, closed w/shoulder |
| Surface Treatment | Cadmium and chromate |
| Surface Treatment Specification | Qq-p-416,type 2,class 3 fed spec single treatment response |
| Thread Class | 3a |
| Thread Diameter | 0.312 |
| Thread Direction | Right-hand |
| Thread Length | 0.531 inches minimum |
| Thread Qty | 24 |
| Thread Qty Per Inch (tpi) | 24 |
| Thread Series Designator | UNF |
| Thread Size | 1/4 |
Cross-reference
No interchangeable or dimensionally similar parts are on record for AN44-7. Try the cross-reference lookup to search by a different part number.
Catalog data updated 2026-07-05. Report a data error