AN4062-1

Description

Barrel is threaded to black base. (Twist on/off) INSTRUCTIONS on how to REMOVE the retaining disk: 1. To remove the disk, you must remove the O-ring spacer inside the barrel. 2. Slam the base of the barrel on a hard flat surface. The Desiccant will push the disk flush with the bottom of the barrel. 3. Once the disk is flush with the barrel, you are able to rotate the disk and remove it. *The disks vary in size by +/- .003 which makes some disks harder to remove than others.* These plugs are used to prevent rust and corrosion in engines while in storage. Contain silica gel which turns from blue to pink when moisture is absorbed. Reusable and refillable. The pink silica gel may be reactivated (after removing from reservoir) by heating for 16 hours at 250°F. DISCOUNT: LESS 10% ON 25, 15% ON 50, 20% ON 100