bolts › machine bolts
AN3CH11A
Aeronautical Standard Machine Bolt
Description
Fastener Length: 1-3/16", Hole Diameter: 1/32", Thread: 10-32, Thread Length: 29/64
Specifications
| Fastener Length | 1.141 inches minimum and 1.188 inches maximum |
|---|---|
| Features Provided | Finished head |
| Grip Length | 0.734 inches minimum and 0.766 inches maximum |
| Hardness Rating | 26.0 rockwell c minimum and 32.0 rockwell c maximum |
| Head Height | 0.109 inches minimum and 0.141 inches maximum |
| Head Style | Hexagon Head |
| Hole Configuration Style | Hexagon flats |
| Hole Diameter | 0.046 |
| Hole Quantity | 1 |
| Hole Type | Drilled |
| Length | 1 3/16 |
| Material | Steel |
| Material Specification | Mil-s-18732 mil spec single material response |
| Min. Tensile Strength (psi) | 125000 pounds per square inch |
| Surface Treatment | Passivate |
| Thread Class | 3a |
| Thread Diameter | 0.190 |
| Thread Direction | Right-hand |
| Thread Length | 0.375 inches minimum and 0.453 inches maximum |
| Thread Qty | 32 |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series Designator | UNF |
| Thread Size | 10 |
| Width Between Flats | 0.365 inches minimum and 0.377 inches maximum |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
No interchangeable or dimensionally similar parts are on record for AN3CH11A. Try the cross-reference lookup to search by a different part number.
Catalog data updated 2026-07-05. Report a data error