pins › threaded tapered pins
AN386-2-14
Taper Pin
Description
Made of alloy steel per specification MIL-P-5673 and cadmium plated per QQ-P-416A, Type lI, Class 3. Provided with drilled hole for cotter pin. Used with clevis forks and in secondary controls which are not subjected to continuous operation
Specifications
| Distance From Centerline Of Hole To End Of Pin | 2.062 |
|---|---|
| Effective Length (in.) | 2 27/32 |
| First End Style | Oval |
| First Hole Diameter | 0.070 inches minimum and 0.080 inches maximum |
| Grip Length | 1.750 |
| Hole Arrangement Style | Drilled shank threaded pin |
| Material | Steel |
| Second End Relationship With First End | Not identical |
| Style Designator | Threaded at small end |
| Surface Treatment | Cadmium |
| Thread Class | 3a |
| Thread Direction | Right-hand |
| Thread Length | 0.562 inches minimum |
| Thread Series Designator | UNF |
| Thread Size | 0.190 |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- AN386-2-14A AN #10 · Steel
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error