bolts › close tolerance bolts
AN178-40
4-1/16 Inch Length Specialty Hexagon Head Close Tolerance Bolt
Description
4-1/16 Inch Length Specialty Hexagon Head Close Tolerance Bolt
Specifications
| Distance From Head Largest Bearing Surface To Shank Hole Center | 0.609 inches nominal first hole |
|---|---|
| Fastener Length | 4.094 |
| Grip | 3 5/16 in |
| Grip Diameter | 0.4986 inches minimum and 0.4991 inches maximum |
| Grip Length | 3.312 |
| Hardness Rating | 26.0 rockwell c minimum and 32.0 rockwell c maximum |
| Head Height | 0.265 inches minimum and 0.297 inches maximum |
| Head Style | Hexagon Head |
| Head Type | Hexagon |
| Industry Standards/Certification | AN178 |
| Length | 4 1/16 in, 4 3/32 |
| Material | Steel |
| Material Specification | Mil-s-5626 mil spec 1st material response or mil-s-6049 mil spec 2nd material response or mil-s-6050 mil spec 3rd material response or mil-s-6098 mil spec 4th material response or mil-s-6758 mil spec 5th material response or ams 6300 assn std 6th material response |
| Min. Tensile Strength (psi) | 125000 pounds per square inch |
| Shank Unthreaded Hole Diameter | 0.106 inches nominal first hole |
| Surface Finish | 63.0 microinches bearing surface of head, 63.0 microinches grip |
| Surface Treatment | Cadmium and chromate |
| Surface Treatment Specification | Qq-p-416 type 2 class 3 fed spec all treatment responses |
| Thread Class | 3a |
| Thread Diameter | 0.500 |
| Thread Direction | Right-hand |
| Thread Length | 0.782 inches minimum |
| Thread Qty | 20 |
| Thread Qty Per Inch (tpi) | 20 |
| Thread Series Designator | UNF |
| Thread Size | 1/2 |
| Weight | .005 lb |
| Width Between Flats | 0.740 inches minimum and 0.752 inches maximum |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
No interchangeable or dimensionally similar parts are on record for AN178-40. Try the cross-reference lookup to search by a different part number.
Catalog data updated 2026-07-05. Report a data error